Clear Care Plus is a convenient and highly effective hydrogen peroxide based system with exclusive moisture technology for soft contact lenses. Clear Care Plus provides simultaneous cleaning, daily protein removal and disinfection of all types of contact lenses, including soft (hydrophilic); silicone hydrogel; and rigid gas permeable lenses. Our patented triple action cleaning formula deeply cleans and kills bacteria while carrying away dirt and debris by attaching to deposits and lifting them away. The exclusive HydraGlyde Moisture Matrix is primarily designed for wetting and lubricating silicone hydrogel lenses. it surrounds soft lenses in long-lasting moisture for extra hydration. Preservative free. Lens case included.
For full product use and safety information it is essential to read the enclosed instruction for use. Always follow the enclosed instructions. Watch the bubbles go to work! Essential steps for cleaning and disinfection: To ensure proper cleaning and disinfection of your lenses you must follow the instructions completely. Do not skip any steps. Always wash, rinse and dry your hands before handling your lenses. 1. Remove and place each lens into the appropriately marked L/R domed lens holder. Thoroughly rinse with Clear Care Plus for 5 seconds. 2. Fill the Clear Care Plus lens cup to the fill line with Clear Care Plus and place the lens holder in the lens cup. Do not underfill or overfill. 3. Tighten the cap on the Clear Care Plus lens cup and store lenses for at least 6 hours. Do not shake the case. Your lenses are ready to wear after soaking for at least 6 hours. Always use the new lens case provided with each new purchase of Clear Care Plus. Dispose of your old lens case. Always follow your eye care professional’s instructions. Please refer to the package insert printed on the inside of this carton for detailed directions and important safety information. Store at room temperature. Once bottle is opened, discard any remaining solution after 3 months of first opening.
Sterile Solution Containing Micro-Filtered Hydrogen Peroxide 3%, Sodium Chloride 0.79%, Stabilized with Phosphonic Acid, a Phosphate Buffered System, Pluronic 17R4 (a Cleaning Agent) and HydraGlyde Moisture Matrix (EOBO-21-Polyoxyethylene-Polyoxybutylene)
CONTRAINDICATIONS (Reasons not to use): Do not use if you are allergic to any of the ingredients. Keep Clear Care Plus out of the reach of children. NOT FOR DIRECT USE ON EYE. If non-neutralized CLEAR CARE PLUS gets into your eyes it will cause burning and stinging. Remove your contact lenses immediately and flush eyes with a large amount of water or sterile saline. Seek immediate assistance from an eye care professional. Never put non-neutralized CLEAR CARE PLUS directly into your eye. Never rinse your contact lenses with CLEAR CARE PLUS before you put them in your eyes. If you want to rinse your lenses, use sterile saline. Do not use a flat lens case. Only use CLEAR CARE PLUS with the special lens case provided. Do not remove lenses from the lens case for at least 6 hours. The solution needs time to neutralize.